Micro Spray Nozzles

Micro nozzle features and specs posted by ioos systems

The micro nozzles can be operated at low atomizing gas (air) and liquid pressures. Air and liquid are externally mixed to produce an extremely fine atomization. External mixing is particularly advantageous when atomizing medium to higher viscosity liquids, such as polymer solutions, since there is minimized risk of clogging compared to inner-mixing spray nozzles. A conical spray pattern is produced. The small liquid and air orifices produce a precise and uniform spray pattern.


B12 micronozzle tip

Air -atomizing micro nozzle (enlarged view of tip section)

Specifications

Micro nozzle features and specs posted by ioos systems

Flow Rate Range..........................................................................8-500 ml/h
Gas Operating Pressure....................................0.7-1.2 bar (10-17.5 psi)
Spray angle ...............................................................................................20°
Spray pattern.......................................................................Round/Full Cone
Setup.............................................................................................External Mix
Mounting..................................................................1/4-28 UNF tapped hole
Weight......................................................................................30 g (1.590 oz)

For more detailed information and droplet size measuremnt data please download flyer.

Accessories

+ Holding fixture for precise positioning in relation to the spray target featuring repeatable installation of micro nozzles during maintenance
+ Tubing and Stainless Steel/ PEEK connectors